
	about us
	news
	products
	heating
	custom engineering
	parts
	resources
	where to buy
	contact us

Heating

QMark provides a wide range of electric, radiant and infrared heaters for residential, commercial and industrial use. Products range from specially designed heating units for installation in concealed spaces to garage heaters, baseboard heaters, unit heaters and more.

Baseboard heaters (Convector heaters)	Portable heaters
Radiant heaters	Wall heaters
Ceiling heaters	Specialty heaters
Unit heaters	Duct heaters
Wash down/ Explosion Pro

>>> QFG Series - Electric Fan-Forced Wall Heaters

Features

Residential: QFG Series electric in-wall heaters are suitable for use in almost any room. Use single heaters in smaller rooms such as bedrooms and bathrooms. Use multiple heaters (controlled by a single thermostat) in larger rooms such as living rooms and family rooms. Wattage should be determined through heat loss calculations.
Commercial: Suitable as the primary heat source in smaller rooms and as supplemental heat in almost any general use area. #
Dual Protection: Thermal cutout with indicator light and one time thermal fuse.
Tangential blower for whisper quiet operation.
Sienna White baked enamel finish.
Open coil element assures quick heat and low maintenance.
Three piece construction for ease of installation.
Permanently lubricated, dust protected bearings.
CLIP-N-FIT® feature Patented Clip-N-Fit® feature (US Patented No. 6,172,343) allows the installer to change the wattage of the heater to a lower output without moving jumper wire. Each heater is factory wired for its maximum wattage. To change wattage, clip out either jumper 1 or 2 as shown in the installation manual for desired wattage. This Patented Clip-N-Fit® feature also prevents the operator to change wattage after installation to a higher wattage.

Specifications

CATALOG NUMBER	UPC 6 85360	VOLTS	CMF	PHASE	WATTAGE	UNIT AMPS	SHIP WT.(lbs.)

QFG1512IFM	08809 9	120	45	1	375/750	3.1/6.3	8 lbs
					1125/1500	9.4/12.5
QFG2024IFM	08810 5	240	45	1	500/1000	2.1/4.2	8 lbs
					1500/2000	6.3/8.3
QFG2224IFM	08811 2	240	45	1	563/1125	2.3/4.7	8 lbs
					1688/2250	7.0/9.4
QFG2228IF	05947 1	208	45	1	2200	10.6	8 lbs
QFG1512T2M	05937 2	120	45	1	1500/1125	12.5/9.4	8 lbs
					750/375	6.3/3.1
QFG2024T2M	05941 9	240	45	1	2000/1500	8.3/6.3	8 lbs
					1000/500	4.2/2.1
QFG2224T2M	05946 4	240	45	1	2250/1688	9.4/7.0	8 lbs
					1125/563	4.7/2.3

CATALOG NUMBER	DESCRIPTION	SHIP WT.
GFRBB	Single backbox	2 lbs
GFRBB6	Multi-pack backbox (6pcs)	10 lbs
QFGTSP	Single pole thermostat (field installed)	1 lb
QFGTDP	Double pole thermostat (field installed)	1 lb
GFRSM	Surface mounting frame	2 lbs

NOTE: “IF” models include heater assembly and grille only. Order back box separately: See accessories.

NOTE: For installations over 7500 feet above sea level we recommend using models under 1500 watts.

NOTE: T2 Model are complete heater assemblies with grille, back box, and thermostat.

Heating

Qmark Engineered Products